B230 Raised Edge Trim

£7.50 – £14.00

Made in the UK and sold in 1.5 and 3 metre lengths, the B230 is an up-stand trim, fitted to contain and direct the flow of water to a gutter

Clear

SKU FTB230 Category


Share
Description

The B230 is an up-stand trim, fitted to contain and direct the flow of water to a gutter. The B230 will match the drip profile of an A170 when used on an adjoining edge.

A single batten is fixed level with the top edge of the deck. Apply 30mm beads of trim adhesive to the batten at 300mm centres, rub the trim into place and nail through the top of the trim into the decking.

Do not nail through the front of the trim, instead where the trims are over-lapped, they should be bonded together with a thin strip of PU adhesive on the inside of the overlapping trim. If a ladder is likely to be leant against a B type trim for access to the roof, the trim will need to be reinforced to avoid deformation.

The trim can either be doubled up by slotting a section of extra trim within the section where the ladder will be used or it can be reinforced by being coated with a layer of GRP laminate and then tissue to maintain a smooth finish. Alternately, a wooden batten can be shaped and fitted into the ridge of the trim to ensure that it remains rigid.

Additional information
Weight N/A
Width

95mm

Depth

105mm

Drip diameter

10mm

Trim length

1.5 metre, 3 metre

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

You may also like…


Free Delivery

Spend over £300 and get free standard delivery on your order.

Privacy Preference Center