Fibrecoat Porosity Sealer 4kg
The Fibrecoat Porosity Sealer is a single component, general purpose primer to seal completely dry porous concrete and cementitious surfaces prior to Fibrecoat Resin application.
Only for use with Fibrecoat
Please note this product can only be used with the Fibrecoat roofing system and is not compatible with the Fibrelast GRP system
Compatible surfaces
You can use the Fibrecoat Porosity Sealer with the Fibrecoat system on a number of different roofing surfaces.
- Asbestos
- Concrete
- Brickwork
- Felt
- Bitumen
- Asphalt
Application guide
The Fibrecoat porosity sealer should be applied using a brush or short pile roller giving an even coating across the substrate at up to 300 g/m2 depending on the surface. For more information visit our support section or contact a member of staff.
Curing times
General curing times for the Fibrecoat Porosity Sealer, please note these times will vary due to changing operating conditions.
Touch dry
Full cure
Minimum overcoating
BASECARE COVER
The best guarantee is the one you’ll never have to use, but just in case our Basecare protection has you covered.
Fibrecoat is protected by our industry-leading Basecare guarantee that includes a range of benefits from standard product protection, approved contractor installation cover and our unique first 5 year Basecare+ warranty.
FIBRECOAT COVER
Fibrecoat can be covered for up to 25 years depending on application
Additional information
| Weight | 4 kg |
|---|
What others are saying
There are no contributions yet.