Fibrecoat PU Activator – 4kg
£54.00
Fibrecoat PU Activator is a single-component, low-viscosity activator designed for priming non-porous surfaces such as exposed metal, PVC, old polyurethanes, polyurea coatings, and GRP before proceeding with the Fibrecoat application. Chat now or call 0113 868 0097
Get free delivery
Need some help?
Project lists
Keep track of the products you need by saving them to a Project List, then come back anytime and pick up right where you left off.
Overview
Fibrecoat PU Activator is a single-component, low-viscosity activator designed for priming non-porous surfaces such as exposed metal, PVC, old polyurethanes, polyurea coatings, glass and GRP before proceeding with applying the Fibrecoat system.
The primer is applied with a roller or bush up to 200g/m2 depending on the condition of the surface. The Fibrecoat PU activator will evaporate leaving a matrix of molecules activating the surface of the substrate. After the primer appears dry, apply the second primer and Fibrecoat resin system.
Substrates
Rubber**
GRP*
Metal*
Polyurea
PVC**
*Requires Porosity Sealer
**Requires Porosity Sealer Flex
Coverage
This will vary depending on surface conditions.
200m2
Smooth surface
Approx. 100gms per square metre
100m2
Rough surface
Approx. 200gms per square metre
Curing times
Times will vary due to temperature and on-site conditions.
Touch dry
Min. overcoating
Max overcoating
Questions
You may also need
Need some help?
Give us a call, request a callback or browse our support section for more information on our products and services.
