Shop Green Roofing
Latest questions
Green roof delivery
How will my green roof be delivered to me
Green roofing weight
Is the building strong enough to hold a green roof?
Green roof guard trim
Do I need to use the guard trim on my green roof?
Can I cut the green roofing modules?
Can I cut the green roofing modules down to size?
Green roofing modules
Our low maintenance green roofing modules are quick and easy to install and provide a natural, environmentally friendly finish to your GRP roof.
Accessories
Along with the modules, we supply a full range of accessories to complete your green roof.
Fibreglass Matting
Latest questions
Lloyds Approval
What is Lloyds Approval and why is it important for GRP Roofing?
Resin coverage
How much will a single can of GRP fibreglass roofing resin cover?
GRP on pitched roofs
Can I use a standard GRP roofing system on a pitched roof?
What is the fibreglass bandage used for?
Do I need to use fibreglass bandage on my flat roof?
Standard reinforcements
We supply a complete range of high quality Lloyds Approved chopped strand matting and surface tissues for use in partnership with the Fibrelast and Fibrecoat fibreglass roofing systems.
450gm Chopped Strand Matting
£5.30 – £150.00600gm Chopped Strand Matting
£5.30 – £150.00Fibreglass tapes
High quality range of fibreglass bandage and tapes for use on roofing joints.
Tools
Latest questions
How long does it take for Fibrecoat to become watertight?
How long does it take for Fibrecoat to become watertight? I live at the top end of Scotland and want a system that I can get down quickly to avoid any sudden downpours.
Will Fibrecoat bond to GRP Roofing trims
I have a roof that needs covering and was originally going to use a standard GRP system but having seen Fibrecoat I would like to use this. My question is will Fibrecoat bond to the GRP roofing trims?
Can I use Fibrecoat without the Glassfibre?
I have a project to do that involves coating a concrete roof which is around 50 square metres and in good condition. I want to know if I can use the Fibrecoat system without the fibreglass as I don't need the reinforcement.
Does the PU Activator make the surface waterproof?
Just looking through your website on Fibrecoat and want to know if I applied the PU activator, would it make the surface waterproof or would I have to apply the Fibrecoat resin system?
Adhesives and sealants
Our range of adhesives and sealants for fibreglass roofing
Buckets
Our range of mixing buckets for both resin and topcoat systems.
Laminating brushes
High quality, chemical resistant laminating brushes made in the UK.
Measuring equipment
Measuring equipment for both Fibrelast catalyst and site and system temperature so you can gauge product curing times.
Solvents and additives
Cleaning solvents for the tools and catalyst for the Fibrelast system
Personal protection
Range of personal protection equipment (PPE) to keep you safe when using the fibreglass roofing systems
Abrasives
Used to clean up the surface prior providing a good key for the Topcoat or second layer
Trims
Latest questions
Will Fibrecoat bond to GRP Roofing trims
I have a roof that needs covering and was originally going to use a standard GRP system but having seen Fibrecoat I would like to use this. My question is will Fibrecoat bond to the GRP roofing trims?
Balcony expansion joints
Can I remove the expansion joints on my GRP balcony roof?
Collecting orders
Can I arrange to collect my GRP roofing orders?
Lead effect trims
What trims do I need in order to get a lead effect on my flat roof?
Corners and closures
We supply a comprehensive range of pre-formed fibreglass corners for GRP roofing applications.
Flat flashing
Flat flashing is mainly used at the intersection of a pitched roof and flat roof often found on dormers.
Fascia trims
This trim is fitted to the lowest edge of the roof usually where the rainwater flows into the gutter.
Simulated lead flashings
These trims are corners are used to simulate the appearance of lead.
Raised edge trims
This up-stand trim is installed to contain and direct the flow of water to a gutter.
Wall fillet trims
Angle fillet trims are fitted where the roof abuts a wall or vertical face, against parapet walls, in box gutters etc.
Expansion joints
Expansion joints allow for expansion on large GRP roofs over 50m2
Angle trims
An angle trim is used when the GRP roofing laminate needs to cover a surface which needs to continue perpendicular to the current level.
Drainage profiles
Additional profiles to assist with GRP roof drainage.
Fibreglass roofing systems
Latest questions
How long does it take for Fibrecoat to become watertight?
How long does it take for Fibrecoat to become watertight? I live at the top end of Scotland and want a system that I can get down quickly to avoid any sudden downpours.
Will Fibrecoat bond to GRP Roofing trims
I have a roof that needs covering and was originally going to use a standard GRP system but having seen Fibrecoat I would like to use this. My question is will Fibrecoat bond to the GRP roofing trims?
Can I use Fibrecoat without the Glassfibre?
I have a project to do that involves coating a concrete roof which is around 50 square metres and in good condition. I want to know if I can use the Fibrecoat system without the fibreglass as I don't need the reinforcement.
Does the PU Activator make the surface waterproof?
Just looking through your website on Fibrecoat and want to know if I applied the PU activator, would it make the surface waterproof or would I have to apply the Fibrecoat resin system?
Fibrelast GRP roofing system
The core materials needed for the Fibrelast GRP roofing system, you can buy all the products and tools individually or purchase them in one of our pre-measured kits. We also supply the complete range of pre-formed trims and corners.
Fibrecoat advanced fibreglass roofing system
The core system components for our advanced Fibrecoat roofing system.